Ironworker outline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The ironworker on the beam as an even line: hard hat, head, arms, harness straps, bolt bag, legs and boots, with the spud wrench, the beam and the column. For colouring pages and pen plotters.
What is in the file
| Size | 81 × 100 mm (3.18 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 19: 1 outer edge and 18 cut-outs |
| Cut length | 1,715 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 307 curve and line segments |
Measured from the file. PNG: 1,631 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.81 × 1 in (21 × 25 mm) | 0.46 mm | 436 mm | 120 | Too fine for most machines |
| 1.62 × 2 in (41 × 51 mm) | 0.91 mm | 871 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 2.42 × 3 in (62 × 76 mm) | 1.4 mm | 1,307 mm | 12 | Vinyl, card and thin sheet |
| 3.23 × 4 in (82 × 102 mm) | 1.8 mm | 1,742 mm | 6 | Vinyl, card and thin sheet |
| 4.85 × 6 in (123 × 152 mm) | 2.7 mm | 2,614 mm | 2 | Vinyl, card and thin sheet |
| 6.46 × 8 in (164 × 203 mm) | 3.7 mm | 3,485 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.7 × 12 in (246 × 305 mm) | 5.5 mm | 5,227 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More ironworker SVG files
-
Layered ironworker in eight colours Layered · 15 pieces -
Ironworker on a beam with a spud wrench Solid · one piece -
Ironworker silhouette on a flat base Solid · one piece -
Ironworker at lunch on a beam Solid · one piece -
Ironworker beam on the hook Solid · one piece -
Ironworker tower crane lifting a beam Solid · one piece -
Ironworker steel frame going up Solid · one piece -
Ironworker tools, spud wrench, pin and beater Solid · one piece
← Ironworker monogram ring with nuts All 15 ironworkers Layered ironworker in eight colours →