Ironworker tools, spud wrench, pin and beater SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Three tools fanned out and welded where they cross: a spud wrench with its open jaw and long spike, a bull pin for lining up holes, and the short sledge called a beater that drives it.
What is in the file
| Size | 100 × 93 mm (3.94 × 3.68 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 722 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 75 curve and line segments |
Measured from the file. PNG: 2,000 × 1,873 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.93 in (25 × 24 mm) | 0.56 mm | 183 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.87 in (51 × 47 mm) | 1.1 mm | 367 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.8 in (76 × 71 mm) | 1.7 mm | 550 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.74 in (102 × 95 mm) | 2.2 mm | 734 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.6 in (152 × 142 mm) | 3.4 mm | 1,100 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.47 in (203 × 190 mm) | 4.5 mm | 1,467 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.21 in (305 × 285 mm) | 6.7 mm | 2,201 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More ironworker SVG files
-
Ironworker spud wrench Solid · one piece -
Ironworker structural bolt and nut Solid · one piece -
Ironworker hard hat over crossed spud wrenches Solid · one piece -
Ironworker in a heart Solid · one piece -
Ironworker beam name frame on a hook Solid · one piece -
Ironworker monogram ring with nuts Solid · one piece -
Ironworker outline Outline · one piece -
Layered ironworker in eight colours Layered · 15 pieces
← Ironworker steel frame going up All 15 ironworkers Ironworker spud wrench →