Ironworker hard hat over crossed spud wrenches SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A full-brim hard hat set over two crossed spud wrenches, their spikes tucked under the brim and their jaws out below. Symmetrical, bold and free of any seal or number, for a lunch box, a truck window or a hoodie.
What is in the file
| Size | 63 × 100 mm (2.48 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 683 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 88 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,287 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.63 × 1 in (16 × 25 mm) | 0.64 mm | 173 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 1.26 × 2 in (32 × 51 mm) | 1.3 mm | 347 mm | 40 | Vinyl, card and thin sheet |
| 1.89 × 3 in (48 × 76 mm) | 1.9 mm | 520 mm | 15 | Vinyl, card and thin sheet |
| 2.52 × 4 in (64 × 102 mm) | 2.5 mm | 694 mm | 8 | Vinyl, card and thin sheet |
| 3.77 × 6 in (96 × 152 mm) | 3.8 mm | 1,041 mm | 3 | Any material, including 3 mm wood and acrylic |
| 5.03 × 8 in (128 × 203 mm) | 5.1 mm | 1,388 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.55 × 12 in (192 × 305 mm) | 7.6 mm | 2,082 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More ironworker SVG files
-
Ironworker in a heart Solid · one piece -
Ironworker beam name frame on a hook Solid · one piece -
Ironworker monogram ring with nuts Solid · one piece -
Ironworker outline Outline · one piece -
Layered ironworker in eight colours Layered · 15 pieces -
Ironworker on a beam with a spud wrench Solid · one piece -
Ironworker silhouette on a flat base Solid · one piece -
Ironworker at lunch on a beam Solid · one piece
← Ironworker structural bolt and nut All 15 ironworkers Ironworker in a heart →