Ironworker monogram ring with nuts SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A ring for initials studded with five hex nuts, with a hard hat on top and a spud wrench lying under the foot. The middle is open for one to three letters.
What is in the file
| Size | 66 × 100 mm (2.6 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 691 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 115 curve and line segments |
Measured from the file. PNG: 1,348 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.66 × 1 in (17 × 25 mm) | 0.38 mm | 176 mm | 140 | Too fine for most machines |
| 1.32 × 2 in (34 × 51 mm) | 0.76 mm | 351 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 1.98 × 3 in (50 × 76 mm) | 1.1 mm | 527 mm | 15 | Vinyl, card and thin sheet |
| 2.64 × 4 in (67 × 102 mm) | 1.5 mm | 702 mm | 8 | Vinyl, card and thin sheet |
| 3.97 × 6 in (101 × 152 mm) | 2.3 mm | 1,053 mm | 2 | Vinyl, card and thin sheet |
| 5.29 × 8 in (134 × 203 mm) | 3 mm | 1,404 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.93 × 12 in (201 × 305 mm) | 4.6 mm | 2,106 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More ironworker SVG files
-
Ironworker outline Outline · one piece -
Layered ironworker in eight colours Layered · 15 pieces -
Ironworker on a beam with a spud wrench Solid · one piece -
Ironworker silhouette on a flat base Solid · one piece -
Ironworker at lunch on a beam Solid · one piece -
Ironworker beam on the hook Solid · one piece -
Ironworker tower crane lifting a beam Solid · one piece -
Ironworker steel frame going up Solid · one piece
← Ironworker beam name frame on a hook All 15 ironworkers Ironworker outline →