Ironworker silhouette on a flat base SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The ironworker as a plain shadow on the steel, with a column behind, a beam overhead and a crane hook hanging from it. One piece with a straight lower edge, for a shadow box.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 98 × 100 mm (3.85 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 1,101 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 156 curve and line segments |
Measured from the file. PNG: 1,960 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.98 × 1 in (25 × 25 mm) | 0.53 mm | 280 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.96 × 2 in (50 × 51 mm) | 1.1 mm | 559 mm | 25 | Vinyl, card and thin sheet |
| 2.94 × 3 in (75 × 76 mm) | 1.6 mm | 839 mm | 9 | Vinyl, card and thin sheet |
| 3.92 × 4 in (99 × 102 mm) | 2.1 mm | 1,119 mm | 4 | Vinyl, card and thin sheet |
| 5.87 × 6 in (149 × 152 mm) | 3.2 mm | 1,678 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.83 × 8 in (199 × 203 mm) | 4.3 mm | 2,237 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.75 × 12 in (298 × 305 mm) | 6.4 mm | 3,356 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More ironworker SVG files
-
Ironworker at lunch on a beam Solid · one piece -
Ironworker beam on the hook Solid · one piece -
Ironworker tower crane lifting a beam Solid · one piece -
Ironworker steel frame going up Solid · one piece -
Ironworker tools, spud wrench, pin and beater Solid · one piece -
Ironworker spud wrench Solid · one piece -
Ironworker structural bolt and nut Solid · one piece -
Ironworker hard hat over crossed spud wrenches Solid · one piece
← Ironworker on a beam with a spud wrench All 15 ironworkers Ironworker at lunch on a beam →