Ironworker on a beam with a spud wrench SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
An ironworker in a full-brim hard hat and a harness, standing on a beam with one hand on the column. A spud wrench hangs from the belt on one side, a bolt bag on the other, and the face is blank.
What is in the file
| Size | 81 × 100 mm (3.18 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 15: 1 outer edge and 14 cut-outs |
| Cut length | 1,521 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 159 curve and line segments |
Measured from the file. PNG: 1,631 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.81 × 1 in (21 × 25 mm) | 0.38 mm | 386 mm | 120 | Too fine for most machines |
| 1.62 × 2 in (41 × 51 mm) | 0.76 mm | 773 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 2.42 × 3 in (62 × 76 mm) | 1.1 mm | 1,159 mm | 12 | Vinyl, card and thin sheet |
| 3.23 × 4 in (82 × 102 mm) | 1.5 mm | 1,545 mm | 6 | Vinyl, card and thin sheet |
| 4.85 × 6 in (123 × 152 mm) | 2.3 mm | 2,318 mm | 2 | Vinyl, card and thin sheet |
| 6.46 × 8 in (164 × 203 mm) | 3 mm | 3,091 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.7 × 12 in (246 × 305 mm) | 4.6 mm | 4,636 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More ironworker SVG files
-
Ironworker silhouette on a flat base Solid · one piece -
Ironworker at lunch on a beam Solid · one piece -
Ironworker beam on the hook Solid · one piece -
Ironworker tower crane lifting a beam Solid · one piece -
Ironworker steel frame going up Solid · one piece -
Ironworker tools, spud wrench, pin and beater Solid · one piece -
Ironworker spud wrench Solid · one piece -
Ironworker structural bolt and nut Solid · one piece
← Layered ironworker in eight colours All 15 ironworkers Ironworker silhouette on a flat base →