Ironworker tower crane lifting a beam SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A tower crane with a braced mast, a long latticed jib, a counterweight, a cab and a trolley, lifting a short beam on two slings. The bracing is about 2 mm wide at 100 mm, so cut it large.
What is in the file
| Size | 91 × 100 mm (3.59 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 27: 1 outer edge and 26 cut-outs |
| Cut length | 1,203 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 188 curve and line segments |
| Also found as | Construction crane SVG |
Measured from the file. PNG: 1,831 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.91 × 1 in (23 × 25 mm) | 0.48 mm | 306 mm | 100 | Too fine for most machines |
| 1.82 × 2 in (46 × 51 mm) | 0.97 mm | 611 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 2.74 × 3 in (69 × 76 mm) | 1.4 mm | 917 mm | 12 | Vinyl, card and thin sheet |
| 3.65 × 4 in (93 × 102 mm) | 1.9 mm | 1,222 mm | 6 | Vinyl, card and thin sheet |
| 5.47 × 6 in (139 × 152 mm) | 2.9 mm | 1,833 mm | 2 | Vinyl, card and thin sheet |
| 7.3 × 8 in (185 × 203 mm) | 3.9 mm | 2,444 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.94 × 12 in (278 × 305 mm) | 5.8 mm | 3,667 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More ironworker SVG files
-
Ironworker steel frame going up Solid · one piece -
Ironworker tools, spud wrench, pin and beater Solid · one piece -
Ironworker spud wrench Solid · one piece -
Ironworker structural bolt and nut Solid · one piece -
Ironworker hard hat over crossed spud wrenches Solid · one piece -
Ironworker in a heart Solid · one piece -
Ironworker beam name frame on a hook Solid · one piece -
Ironworker monogram ring with nuts Solid · one piece
← Ironworker beam on the hook All 15 ironworkers Ironworker steel frame going up →