Free ironworker SVG

Ironworker in a heart SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Ironworker in a heart, as a solid black shape
Ironworker in a heart. The preview is the SVG file itself.

The outline of a heart with a steel beam across it from side to side and an ironworker in a hard hat standing on the beam, one hand on the hip. For an ironworker’s wife, mum or daughter.

What is in the file

Size100 × 90 mm (3.94 × 3.56 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length916 mm at this size
Narrowest part1 mm at this size
Nodes117 curve and line segments

Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.25 mm233 mm110Too fine for most machines
2 × 1.81 in (51 × 46 mm)0.51 mm465 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.71 in (76 × 69 mm)0.76 mm698 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.62 in (102 × 92 mm)1 mm931 mm6Vinyl, card and thin sheet
6 × 5.42 in (152 × 138 mm)1.5 mm1,396 mm2Vinyl, card and thin sheet
8 × 7.23 in (203 × 184 mm)2 mm1,861 mm1Vinyl, card and thin sheet
12 × 10.85 in (305 × 276 mm)3 mm2,792 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ironworker SVG files

← Ironworker hard hat over crossed spud wrenches All 15 ironworkers Ironworker beam name frame on a hook →