Ironworker beam on the hook SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A steel beam slung level from a crane hook by two cables and a ring, with flange lines along it and a pair of bolt holes at each end. A wide, level shape to sit over a name.
What is in the file
| Size | 88 × 100 mm (3.44 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 863 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 99 curve and line segments |
Measured from the file. PNG: 1,760 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.88 × 1 in (22 × 25 mm) | 0.46 mm | 219 mm | 110 | Too fine for most machines |
| 1.75 × 2 in (44 × 51 mm) | 0.91 mm | 438 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 2.63 × 3 in (67 × 76 mm) | 1.4 mm | 658 mm | 12 | Vinyl, card and thin sheet |
| 3.5 × 4 in (89 × 102 mm) | 1.8 mm | 877 mm | 6 | Vinyl, card and thin sheet |
| 5.25 × 6 in (133 × 152 mm) | 2.7 mm | 1,315 mm | 2 | Vinyl, card and thin sheet |
| 7 × 8 in (178 × 203 mm) | 3.7 mm | 1,754 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.5 × 12 in (267 × 305 mm) | 5.5 mm | 2,630 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More ironworker SVG files
-
Ironworker tower crane lifting a beam Solid · one piece -
Ironworker steel frame going up Solid · one piece -
Ironworker tools, spud wrench, pin and beater Solid · one piece -
Ironworker spud wrench Solid · one piece -
Ironworker structural bolt and nut Solid · one piece -
Ironworker hard hat over crossed spud wrenches Solid · one piece -
Ironworker in a heart Solid · one piece -
Ironworker beam name frame on a hook Solid · one piece
← Ironworker at lunch on a beam All 15 ironworkers Ironworker tower crane lifting a beam →