Two Titles Dad and Papa stencil plate SVG
A rounded plate with “I HAVE TWO TITLES DAD AND PAPA” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 79 mm (3.94 × 3.13 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 25: 1 outer edge and 24 cut-outs |
| Cut length | 1,676 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 458 curve and line segments |
Measured from the file. PNG: 2,000 × 1,604 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.79 in (25 × 20 mm) | 0.36 mm | 426 mm | 120 | Too fine for most machines |
| 2 × 1.59 in (51 × 40 mm) | 0.71 mm | 851 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.38 in (76 × 61 mm) | 1.1 mm | 1,277 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.18 in (102 × 81 mm) | 1.4 mm | 1,703 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.76 in (152 × 121 mm) | 2.1 mm | 2,554 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.35 in (203 × 161 mm) | 2.8 mm | 3,406 mm | 1 | Vinyl, card and thin sheet |
| 12 × 9.53 in (305 × 242 mm) | 4.3 mm | 5,108 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Have Two Titles Dad and Papa SVG files
-
Two Titles Dad and Papa with a drop shadow Layered · 18 pieces -
Two Titles Dad and Papa in Pacifico Solid · 12 pieces -
Two Titles Dad and Papa in Lobster Solid · 15 pieces -
Two Titles Dad and Papa in Kaushan Script Solid · 25 pieces -
Two Titles Dad and Papa in Lilita One Solid · 25 pieces -
Two Titles Dad and Papa in Alfa Slab One Solid · 7 pieces -
Two Titles Dad and Papa in Amatic SC Solid · 24 pieces -
Two Titles Dad and Papa in block capitals Solid · 24 pieces
← Two Titles Dad and Papa outline lettering All 12 I Have Two Titles Dad and Papa designs Two Titles Dad and Papa with a drop shadow →