Two Titles Dad and Papa in Pacifico SVG
“I Have Two Titles Dad and Papa” set in Pacifico, a bold brush script, on 3 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 77 mm (3.94 × 3.04 in), scales to any size |
|---|---|
| Pieces | 12 separate pieces |
| Outlines to cut | 31: 12 outer edges and 19 cut-outs |
| Cut length | 1,264 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 767 curve and line segments |
Measured from the file. PNG: 2,000 × 1,563 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.77 in (25 × 20 mm) | 0.33 mm | 321 mm | 120 | Too fine for most machines |
| 2 × 1.55 in (51 × 39 mm) | 0.66 mm | 642 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.32 in (76 × 59 mm) | 0.99 mm | 963 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.09 in (102 × 79 mm) | 1.3 mm | 1,284 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.64 in (152 × 118 mm) | 2 mm | 1,926 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.18 in (203 × 157 mm) | 2.6 mm | 2,568 mm | 1 | Vinyl, card and thin sheet |
| 12 × 9.28 in (305 × 236 mm) | 4 mm | 3,853 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Have Two Titles Dad and Papa SVG files
-
Two Titles Dad and Papa in Lobster Solid · 15 pieces -
Two Titles Dad and Papa in Kaushan Script Solid · 25 pieces -
Two Titles Dad and Papa in Lilita One Solid · 25 pieces -
Two Titles Dad and Papa in Alfa Slab One Solid · 7 pieces -
Two Titles Dad and Papa in Amatic SC Solid · 24 pieces -
Two Titles Dad and Papa in block capitals Solid · 24 pieces -
Two Titles Dad and Papa in script and capitals Solid · 21 pieces -
Two Titles Dad and Papa with stars Solid · 21 pieces
← Two Titles Dad and Papa with a drop shadow All 12 I Have Two Titles Dad and Papa designs Two Titles Dad and Papa in Lobster →