Two Titles Dad and Papa in Kaushan Script SVG
“I Have Two Titles Dad and Papa” set in Kaushan Script, a lively brush script, on 3 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 62 mm (3.94 × 2.43 in), scales to any size |
|---|---|
| Pieces | 25 separate pieces |
| Outlines to cut | 38: 25 outer edges and 13 cut-outs |
| Cut length | 1,216 mm at this size |
| Narrowest part | 0.8 mm at this size |
| Nodes | 713 curve and line segments |
Measured from the file. PNG: 2,000 × 1,262 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.62 in (25 × 16 mm) | 0.2 mm | 309 mm | 140 | Too fine for most machines |
| 2 × 1.23 in (51 × 31 mm) | 0.41 mm | 618 mm | 40 | Too fine for most machines |
| 3 × 1.85 in (76 × 47 mm) | 0.61 mm | 927 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.46 in (102 × 63 mm) | 0.81 mm | 1,235 mm | 8 | Fine detail: vinyl and paper only, weed with care |
| 6 × 3.7 in (152 × 94 mm) | 1.2 mm | 1,853 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.93 in (203 × 125 mm) | 1.6 mm | 2,471 mm | 2 | Vinyl, card and thin sheet |
| 12 × 7.39 in (305 × 188 mm) | 2.4 mm | 3,706 mm | 1 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Have Two Titles Dad and Papa SVG files
-
Two Titles Dad and Papa in Lilita One Solid · 25 pieces -
Two Titles Dad and Papa in Alfa Slab One Solid · 7 pieces -
Two Titles Dad and Papa in Amatic SC Solid · 24 pieces -
Two Titles Dad and Papa in block capitals Solid · 24 pieces -
Two Titles Dad and Papa in script and capitals Solid · 21 pieces -
Two Titles Dad and Papa with stars Solid · 21 pieces -
Two Titles Dad and Papa outline lettering Outline · 28 pieces -
Two Titles Dad and Papa stencil plate Solid · one piece
← Two Titles Dad and Papa in Lobster All 12 I Have Two Titles Dad and Papa designs Two Titles Dad and Papa in Lilita One →