Two Titles Dad and Papa outline lettering SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I Have Two Titles Dad and Papa” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.
What is in the file
| Size | 100 × 50 mm (3.94 × 1.98 in), scales to any size |
|---|---|
| Pieces | 25 separate pieces |
| Outlines to cut | 59: 25 outer edges and 34 cut-outs |
| Cut length | 1,179 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 573 curve and line segments |
Measured from the file. PNG: 2,000 × 1,046 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.5 in (25 × 13 mm) | 0.33 mm | 299 mm | 170 | Too fine for most machines |
| 2 × 1.01 in (51 × 26 mm) | 0.66 mm | 599 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.51 in (76 × 38 mm) | 0.99 mm | 898 mm | 21 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.02 in (102 × 51 mm) | 1.3 mm | 1,198 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.02 in (152 × 77 mm) | 2 mm | 1,797 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.03 in (203 × 102 mm) | 2.6 mm | 2,396 mm | 2 | Vinyl, card and thin sheet |
| 12 × 6.05 in (305 × 154 mm) | 4 mm | 3,594 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Have Two Titles Dad and Papa SVG files
-
Two Titles Dad and Papa stencil plate Solid · one piece
-
Two Titles Dad and Papa with a drop shadow Layered · 18 pieces
-
Two Titles Dad and Papa with a handlebar moustache Solid · 22 pieces
-
Two Titles Dad and Papa in Pacifico Solid · 12 pieces
-
Two Titles Dad and Papa in Lobster Solid · 15 pieces
-
Two Titles Dad and Papa in Kaushan Script Solid · 23 pieces
-
Two Titles Dad and Papa in Lilita One Solid · 25 pieces
-
Two Titles Dad and Papa in Alfa Slab One Solid · 25 pieces
← Two Titles Dad and Papa with stars All 13 I Have Two Titles Dad and Papa designs Two Titles Dad and Papa stencil plate →