Two Titles Dad and Papa with a drop shadow SVG
“I Have Two Titles Dad and Papa” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 78 mm (3.94 × 3.07 in), scales to any size |
|---|---|
| Pieces | 18 separate pieces |
| Outlines to cut | 40: 18 outer edges and 22 cut-outs |
| Cut length | 2,046 mm at this size |
| Narrowest part | 1.6 mm at this size |
| Nodes | 1,025 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,577 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.78 in (25 × 20 mm) | 0.41 mm | 520 mm | 120 | Too fine for most machines |
| 2 × 1.56 in (51 × 40 mm) | 0.81 mm | 1,039 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.34 in (76 × 59 mm) | 1.2 mm | 1,559 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.12 in (102 × 79 mm) | 1.6 mm | 2,079 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.68 in (152 × 119 mm) | 2.4 mm | 3,118 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.24 in (203 × 158 mm) | 3.3 mm | 4,157 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.36 in (305 × 238 mm) | 4.9 mm | 6,236 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Have Two Titles Dad and Papa SVG files
-
Two Titles Dad and Papa in Pacifico Solid · 12 pieces -
Two Titles Dad and Papa in Lobster Solid · 15 pieces -
Two Titles Dad and Papa in Kaushan Script Solid · 25 pieces -
Two Titles Dad and Papa in Lilita One Solid · 25 pieces -
Two Titles Dad and Papa in Alfa Slab One Solid · 7 pieces -
Two Titles Dad and Papa in Amatic SC Solid · 24 pieces -
Two Titles Dad and Papa in block capitals Solid · 24 pieces -
Two Titles Dad and Papa in script and capitals Solid · 21 pieces
← Two Titles Dad and Papa stencil plate All 12 I Have Two Titles Dad and Papa designs Two Titles Dad and Papa in Pacifico →