Two Titles Dad and Papa with a handlebar moustache SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I Have Two Titles Dad and Papa” with a handlebar moustache above the words: the first line in Pacifico script, the rest in narrow capitals, the lines made the same width. The picture is a separate piece, so it can be cut in a second colour or left off.
What is in the file
| Size | 98 × 100 mm (3.87 × 3.94 in), scales to any size |
|---|---|
| Pieces | 22 separate pieces |
| Outlines to cut | 35: 22 outer edges and 13 cut-outs |
| Cut length | 2,057 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 389 curve and line segments |
Measured from the file. PNG: 1,965 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.98 × 1 in (25 × 25 mm) | 0.51 mm | 522 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.96 × 2 in (50 × 51 mm) | 1 mm | 1,045 mm | 25 | Vinyl, card and thin sheet |
| 2.95 × 3 in (75 × 76 mm) | 1.5 mm | 1,567 mm | 9 | Vinyl, card and thin sheet |
| 3.93 × 4 in (100 × 102 mm) | 2 mm | 2,090 mm | 4 | Vinyl, card and thin sheet |
| 5.89 × 6 in (150 × 152 mm) | 3 mm | 3,135 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.86 × 8 in (200 × 203 mm) | 4.1 mm | 4,180 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.78 × 12 in (299 × 305 mm) | 6.1 mm | 6,270 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Have Two Titles Dad and Papa SVG files
-
Two Titles Dad and Papa in Pacifico Solid · 12 pieces -
Two Titles Dad and Papa in Lobster Solid · 15 pieces -
Two Titles Dad and Papa in Kaushan Script Solid · 23 pieces -
Two Titles Dad and Papa in Lilita One Solid · 25 pieces -
Two Titles Dad and Papa in Alfa Slab One Solid · 25 pieces -
Two Titles Dad and Papa in Amatic SC Solid · 24 pieces -
Two Titles Dad and Papa in block capitals Solid · 24 pieces -
Two Titles Dad and Papa in script and capitals Solid · 21 pieces
← Two Titles Dad and Papa with a drop shadow All 13 I Have Two Titles Dad and Papa designs Two Titles Dad and Papa in Pacifico →