Two Titles Dad and Papa in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I Have Two Titles Dad and Papa” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 47 mm (3.94 × 1.86 in), scales to any size |
|---|---|
| Pieces | 25 separate pieces |
| Outlines to cut | 38: 25 outer edges and 13 cut-outs |
| Cut length | 1,072 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 424 curve and line segments |
Measured from the file. PNG: 2,000 × 987 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.47 in (25 × 12 mm) | 0.36 mm | 272 mm | 180 | Too fine for most machines |
| 2 × 0.95 in (51 × 24 mm) | 0.71 mm | 545 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.42 in (76 × 36 mm) | 1.1 mm | 817 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.89 in (102 × 48 mm) | 1.4 mm | 1,089 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.84 in (152 × 72 mm) | 2.1 mm | 1,634 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.78 in (203 × 96 mm) | 2.8 mm | 2,178 mm | 3 | Vinyl, card and thin sheet |
| 12 × 5.68 in (305 × 144 mm) | 4.3 mm | 3,267 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Have Two Titles Dad and Papa SVG files
-
Two Titles Dad and Papa in Amatic SC Solid · 24 pieces
-
Two Titles Dad and Papa in block capitals Solid · 24 pieces
-
Two Titles Dad and Papa in script and capitals Solid · 21 pieces
-
Two Titles Dad and Papa with stars Solid · 21 pieces
-
Two Titles Dad and Papa outline lettering Outline · 25 pieces
-
Two Titles Dad and Papa stencil plate Solid · one piece
-
Two Titles Dad and Papa with a drop shadow Layered · 18 pieces
-
Two Titles Dad and Papa with a handlebar moustache Solid · 22 pieces
← Two Titles Dad and Papa in Lilita One All 13 I Have Two Titles Dad and Papa designs Two Titles Dad and Papa in Amatic SC →