Two Titles Dad and Papa in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I Have Two Titles Dad and Papa” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 53 mm (3.94 × 2.09 in), scales to any size |
|---|---|
| Pieces | 25 separate pieces |
| Outlines to cut | 38: 25 outer edges and 13 cut-outs |
| Cut length | 1,017 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 403 curve and line segments |
Measured from the file. PNG: 2,000 × 1,096 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.53 in (25 × 13 mm) | 0.46 mm | 258 mm | 160 | Too fine for most machines |
| 2 × 1.06 in (51 × 27 mm) | 0.91 mm | 517 mm | 45 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.59 in (76 × 40 mm) | 1.4 mm | 775 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.12 in (102 × 54 mm) | 1.8 mm | 1,033 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.18 in (152 × 81 mm) | 2.7 mm | 1,550 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.24 in (203 × 108 mm) | 3.7 mm | 2,067 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.36 in (305 × 162 mm) | 5.5 mm | 3,100 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Have Two Titles Dad and Papa SVG files
-
Two Titles Dad and Papa in Alfa Slab One Solid · 25 pieces
-
Two Titles Dad and Papa in Amatic SC Solid · 24 pieces
-
Two Titles Dad and Papa in block capitals Solid · 24 pieces
-
Two Titles Dad and Papa in script and capitals Solid · 21 pieces
-
Two Titles Dad and Papa with stars Solid · 21 pieces
-
Two Titles Dad and Papa outline lettering Outline · 25 pieces
-
Two Titles Dad and Papa stencil plate Solid · one piece
-
Two Titles Dad and Papa with a drop shadow Layered · 18 pieces
← Two Titles Dad and Papa in Kaushan Script All 13 I Have Two Titles Dad and Papa designs Two Titles Dad and Papa in Alfa Slab One →