Two Titles Dad and Papa in Amatic SC SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I Have Two Titles Dad and Papa” set in Amatic SC, narrow hand-drawn capitals, on 3 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.
What is in the file
| Size | 100 × 84 mm (3.94 × 3.32 in), scales to any size |
|---|---|
| Pieces | 24 separate pieces |
| Outlines to cut | 35: 24 outer edges and 11 cut-outs |
| Cut length | 1,734 mm at this size |
| Narrowest part | 0.9 mm at this size |
| Nodes | 665 curve and line segments |
Measured from the file. PNG: 2,000 × 1,700 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.84 in (25 × 21 mm) | 0.23 mm | 440 mm | 110 | Too fine for most machines |
| 2 × 1.69 in (51 × 43 mm) | 0.46 mm | 881 mm | 30 | Too fine for most machines |
| 3 × 2.53 in (76 × 64 mm) | 0.69 mm | 1,321 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.38 in (102 × 86 mm) | 0.91 mm | 1,762 mm | 6 | Fine detail: vinyl and paper only, weed with care |
| 6 × 5.06 in (152 × 129 mm) | 1.4 mm | 2,643 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.75 in (203 × 172 mm) | 1.8 mm | 3,523 mm | 1 | Vinyl, card and thin sheet |
| 12 × 10.13 in (305 × 257 mm) | 2.7 mm | 5,285 mm | 1 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Have Two Titles Dad and Papa SVG files
-
Two Titles Dad and Papa in block capitals Solid · 24 pieces
-
Two Titles Dad and Papa in script and capitals Solid · 21 pieces
-
Two Titles Dad and Papa with stars Solid · 21 pieces
-
Two Titles Dad and Papa outline lettering Outline · 25 pieces
-
Two Titles Dad and Papa stencil plate Solid · one piece
-
Two Titles Dad and Papa with a drop shadow Layered · 18 pieces
-
Two Titles Dad and Papa with a handlebar moustache Solid · 22 pieces
-
Two Titles Dad and Papa in Pacifico Solid · 12 pieces
← Two Titles Dad and Papa in Alfa Slab One All 13 I Have Two Titles Dad and Papa designs Two Titles Dad and Papa in block capitals →