Free hockey SVG

Crossed hockey sticks SVG

Crossed hockey sticks, as a solid black shape — Crossed hockey sticks. The preview is the SVG file itself.

Two sticks crossed with their blades at the bottom, pointing out, welded where the shafts meet. A base for a team sign or a bedroom door.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 75 mm (3.94 × 2.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	592 mm at this size
Narrowest part	2.3 mm at this size
Nodes	94 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,515 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.75 in (25 × 19 mm)	0.58 mm	150 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.5 in (51 × 38 mm)	1.2 mm	301 mm	35	Vinyl, card and thin sheet
3 × 2.24 in (76 × 57 mm)	1.8 mm	451 mm	12	Vinyl, card and thin sheet
4 × 2.99 in (102 × 76 mm)	2.3 mm	601 mm	6	Vinyl, card and thin sheet
6 × 4.49 in (152 × 114 mm)	3.5 mm	902 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.98 in (203 × 152 mm)	4.7 mm	1,203 mm	1	Any material, including 3 mm wood and acrylic
12 × 8.98 in (305 × 228 mm)	7 mm	1,804 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hockey SVG files

← Hockey stick All 15 hockey designs Crossed hockey sticks with a puck →