Free hockey SVG

Hockey puck SVG

Hockey puck, as a solid black shape — Hockey puck. The preview is the SVG file itself.

A puck seen from a little above, with a cut line round the front of its top face and grip marks down its side. The flat top takes a number or an initial.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 57 mm (3.94 × 2.24 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	13: 1 outer edge and 12 cut-outs
Cut length	766 mm at this size
Narrowest part	2.9 mm at this size
Nodes	86 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,173 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.57 in (25 × 14 mm)	0.74 mm	195 mm	150	Fine detail: vinyl and paper only, weed with care
2 × 1.14 in (51 × 29 mm)	1.5 mm	389 mm	45	Vinyl, card and thin sheet
3 × 1.71 in (76 × 43 mm)	2.2 mm	584 mm	18	Vinyl, card and thin sheet
4 × 2.28 in (102 × 58 mm)	2.9 mm	778 mm	8	Vinyl, card and thin sheet
6 × 3.42 in (152 × 87 mm)	4.4 mm	1,167 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.56 in (203 × 116 mm)	5.9 mm	1,557 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.84 in (305 × 174 mm)	8.8 mm	2,335 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hockey SVG files

← Ice hockey stick outline All 15 hockey designs Hockey skate →