Free hockey SVG

Hockey skate SVG

Hockey skate, as a solid black shape — Hockey skate. The preview is the SVG file itself.

One skate in profile: a boot with a tongue, six laces and a toe cap, on a holder with a long steel blade. The gap under the boot is open, as on a real skate.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 90 mm (3.94 × 3.56 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	755 mm at this size
Narrowest part	3.3 mm at this size
Nodes	137 curve and line segments

Measured from the file. PNG: 2,000 × 1,813 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.9 in (25 × 23 mm)	0.84 mm	192 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.81 in (51 × 46 mm)	1.7 mm	384 mm	30	Vinyl, card and thin sheet
3 × 2.71 in (76 × 69 mm)	2.5 mm	575 mm	12	Vinyl, card and thin sheet
4 × 3.61 in (102 × 92 mm)	3.4 mm	767 mm	6	Any material, including 3 mm wood and acrylic
6 × 5.42 in (152 × 138 mm)	5 mm	1,151 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.22 in (203 × 183 mm)	6.7 mm	1,534 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.84 in (305 × 275 mm)	10 mm	2,301 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hockey SVG files

← Hockey puck All 15 hockey designs Pair of hockey skates →