Free hockey SVG

Ice hockey emblem SVG

Ice hockey emblem, as a solid black shape — Ice hockey emblem. The preview is the SVG file itself.

Crossed sticks and a puck inside a ring, like a rink-side badge. The stick ends and blades run into the ring, so the whole emblem is one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	15: 1 outer edge and 14 cut-outs
Cut length	1,117 mm at this size
Narrowest part	2.3 mm at this size
Nodes	107 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.58 mm	284 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.2 mm	567 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	1.8 mm	851 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	2.3 mm	1,135 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	3.5 mm	1,702 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	4.7 mm	2,270 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	7 mm	3,405 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hockey SVG files

← Hockey jersey All 15 hockey designs Hockey heart with crossed sticks →