Free hockey SVG

Crossed hockey sticks with a puck SVG

Crossed hockey sticks with a puck, as a solid black shape — Crossed hockey sticks with a puck. The preview is the SVG file itself.

Two crossed sticks with a puck on the ice between their blades. The puck touches both heels, so all three weld into one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 79 mm (3.94 × 3.11 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	13: 1 outer edge and 12 cut-outs
Cut length	676 mm at this size
Narrowest part	2.2 mm at this size
Nodes	99 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,594 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.79 in (25 × 20 mm)	0.56 mm	172 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.58 in (51 × 40 mm)	1.1 mm	343 mm	30	Vinyl, card and thin sheet
3 × 2.37 in (76 × 60 mm)	1.7 mm	515 mm	12	Vinyl, card and thin sheet
4 × 3.16 in (102 × 80 mm)	2.2 mm	687 mm	6	Vinyl, card and thin sheet
6 × 4.73 in (152 × 120 mm)	3.4 mm	1,030 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.31 in (203 × 160 mm)	4.5 mm	1,374 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.47 in (305 × 240 mm)	6.7 mm	2,060 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hockey SVG files

← Crossed hockey sticks All 15 hockey designs Hockey stick and puck →