Ice hockey stick outline SVG
The stick as a line: the edge of the shaft and blade drawn in one closed loop with nothing inside. For pen plotters, foil and engraving.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 95 mm (3.94 × 3.72 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 598 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 48 curve and line segments |
Measured from the file. PNG: 2,000 × 1,896 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.95 in (25 × 24 mm) | 0.48 mm | 152 mm | 100 | Too fine for most machines |
| 2 × 1.89 in (51 × 48 mm) | 0.97 mm | 304 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.84 in (76 × 72 mm) | 1.4 mm | 456 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.78 in (102 × 96 mm) | 1.9 mm | 608 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.68 in (152 × 144 mm) | 2.9 mm | 911 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.57 in (203 × 192 mm) | 3.9 mm | 1,215 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.35 in (305 × 288 mm) | 5.8 mm | 1,823 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Hockey puck 
Hockey skate 
Pair of hockey skates 
Hockey goal 
Hockey rink 
Hockey jersey 
Ice hockey emblem 
Hockey heart with crossed sticks 