Pair of hockey skates SVG
Two skates back to back, welded at the blades into one piece, with four bold laces each so the detail survives at half the size of the single skate.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 46 mm (3.94 × 1.81 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 13: 1 outer edge and 12 cut-outs |
| Cut length | 596 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 171 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 962 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.46 in (25 × 12 mm) | 0.43 mm | 151 mm | 180 | Too fine for most machines |
| 2 × 0.92 in (51 × 23 mm) | 0.86 mm | 303 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.38 in (76 × 35 mm) | 1.3 mm | 454 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.84 in (102 × 47 mm) | 1.7 mm | 606 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.76 in (152 × 70 mm) | 2.6 mm | 908 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.68 in (203 × 93 mm) | 3.5 mm | 1,211 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.52 in (305 × 140 mm) | 5.2 mm | 1,817 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Hockey goal 
Hockey rink 
Hockey jersey 
Ice hockey emblem 
Hockey heart with crossed sticks 
Hockey heartbeat line 
Field hockey sticks and ball 
Hockey stick 