Free hockey SVG

Hockey stick SVG

Hockey stick, as a solid black shape — Hockey stick. The preview is the SVG file itself.

A player’s stick with the blade flat on the ice: a straight shaft, a knob of tape at the top and five wraps of tape cut into the blade.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 95 mm (3.94 × 3.72 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	388 mm at this size
Narrowest part	2.9 mm at this size
Nodes	50 curve and line segments

Measured from the file. PNG: 2,000 × 1,896 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.95 in (25 × 24 mm)	0.74 mm	99 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.89 in (51 × 48 mm)	1.5 mm	197 mm	25	Vinyl, card and thin sheet
3 × 2.84 in (76 × 72 mm)	2.2 mm	296 mm	12	Vinyl, card and thin sheet
4 × 3.78 in (102 × 96 mm)	2.9 mm	394 mm	6	Vinyl, card and thin sheet
6 × 5.68 in (152 × 144 mm)	4.4 mm	591 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.57 in (203 × 192 mm)	5.9 mm	788 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.35 in (305 × 288 mm)	8.8 mm	1,183 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hockey SVG files

← Field hockey sticks and ball All 15 hockey designs Crossed hockey sticks →