Free hockey SVG

Hockey stick and puck SVG

Hockey stick and puck, as a solid black shape — Hockey stick and puck. The preview is the SVG file itself.

One stick with a puck sitting at the toe of its blade, ready for a shot. The puck is welded to the blade so nothing is loose.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 79 mm (3.94 × 3.11 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	393 mm at this size
Narrowest part	2.3 mm at this size
Nodes	67 curve and line segments

Measured from the file. PNG: 2,000 × 1,598 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.79 in (25 × 20 mm)	0.58 mm	100 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.58 in (51 × 40 mm)	1.2 mm	200 mm	30	Vinyl, card and thin sheet
3 × 2.37 in (76 × 60 mm)	1.8 mm	299 mm	12	Vinyl, card and thin sheet
4 × 3.16 in (102 × 80 mm)	2.3 mm	399 mm	6	Vinyl, card and thin sheet
6 × 4.75 in (152 × 121 mm)	3.5 mm	599 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.33 in (203 × 161 mm)	4.7 mm	799 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.49 in (305 × 241 mm)	7 mm	1,198 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hockey SVG files

← Crossed hockey sticks with a puck All 15 hockey designs Ice hockey stick outline →