Grandpa in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Grandpa” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 22 mm (3.94 × 0.88 in), scales to any size |
|---|---|
| Pieces | 7 separate pieces |
| Outlines to cut | 11: 7 outer edges and 4 cut-outs |
| Cut length | 515 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 169 curve and line segments |
Measured from the file. PNG: 2,000 × 508 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.22 in (25 × 6 mm) | 0.56 mm | 131 mm | 280 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.45 in (51 × 11 mm) | 1.1 mm | 262 mm | 90 | Vinyl, card and thin sheet |
| 3 × 0.67 in (76 × 17 mm) | 1.7 mm | 392 mm | 39 | Vinyl, card and thin sheet |
| 4 × 0.9 in (102 × 23 mm) | 2.2 mm | 523 mm | 22 | Vinyl, card and thin sheet |
| 6 × 1.34 in (152 × 34 mm) | 3.4 mm | 785 mm | 7 | Any material, including 3 mm wood and acrylic |
| 8 × 1.79 in (203 × 46 mm) | 4.5 mm | 1,046 mm | 6 | Any material, including 3 mm wood and acrylic |
| 12 × 2.69 in (305 × 68 mm) | 6.7 mm | 1,570 mm | 4 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Grandpa SVG files
-
Grandpa in Amatic SC Solid · 7 pieces
-
Grandpa in block capitals Solid · 7 pieces
-
Grandpa with a swash underline Solid · 2 pieces
-
Grandpa with stars Solid · 10 pieces
-
Grandpa outline lettering Outline · 9 pieces
-
Grandpa stencil plate Solid · one piece
-
Grandpa with a drop shadow Layered · 2 pieces
-
Grandpa with a handlebar moustache Solid · 5 pieces
← Grandpa in Lilita One All 13 Grandpa designs Grandpa in Amatic SC →