Grandpa with a swash underline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Grandpa” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.
What is in the file
| Size | 100 × 44 mm (3.94 × 1.72 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 9: 2 outer edges and 7 cut-outs |
| Cut length | 834 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 241 curve and line segments |
Measured from the file. PNG: 2,000 × 919 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.44 in (25 × 11 mm) | 0.43 mm | 212 mm | 190 | Too fine for most machines |
| 2 × 0.88 in (51 × 22 mm) | 0.86 mm | 424 mm | 55 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.31 in (76 × 33 mm) | 1.3 mm | 636 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.75 in (102 × 45 mm) | 1.7 mm | 847 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.63 in (152 × 67 mm) | 2.6 mm | 1,271 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.5 in (203 × 89 mm) | 3.5 mm | 1,695 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.26 in (305 × 134 mm) | 5.2 mm | 2,542 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Grandpa SVG files
-
Grandpa with stars Solid · 10 pieces
-
Grandpa outline lettering Outline · 9 pieces
-
Grandpa stencil plate Solid · one piece
-
Grandpa with a drop shadow Layered · 2 pieces
-
Grandpa with a handlebar moustache Solid · 5 pieces
-
Grandpa in Pacifico Solid · one piece
-
Grandpa in Lobster Solid · 4 pieces
-
Grandpa in Kaushan Script Solid · 7 pieces
← Grandpa in block capitals All 13 Grandpa designs Grandpa with stars →