Grandpa with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Grandpa” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 39 mm (3.94 × 1.54 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 15: 2 outer edges and 13 cut-outs |
| Cut length | 1,037 mm at this size |
| Narrowest part | 4 mm at this size |
| Nodes | 313 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 829 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.39 in (25 × 10 mm) | 1 mm | 263 mm | 200 | Vinyl, card and thin sheet |
| 2 × 0.78 in (51 × 20 mm) | 2 mm | 527 mm | 60 | Vinyl, card and thin sheet |
| 3 × 1.17 in (76 × 30 mm) | 3 mm | 790 mm | 24 | Any material, including 3 mm wood and acrylic |
| 4 × 1.56 in (102 × 40 mm) | 4.1 mm | 1,054 mm | 12 | Any material, including 3 mm wood and acrylic |
| 6 × 2.35 in (152 × 60 mm) | 6.1 mm | 1,580 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.13 in (203 × 79 mm) | 8.1 mm | 2,107 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.69 in (305 × 119 mm) | 12 mm | 3,161 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Grandpa SVG files
-
Grandpa with a handlebar moustache Solid · 5 pieces
-
Grandpa in Pacifico Solid · one piece
-
Grandpa in Lobster Solid · 4 pieces
-
Grandpa in Kaushan Script Solid · 7 pieces
-
Grandpa in Lilita One Solid · 7 pieces
-
Grandpa in Alfa Slab One Solid · 7 pieces
-
Grandpa in Amatic SC Solid · 7 pieces
-
Grandpa in block capitals Solid · 7 pieces
← Grandpa stencil plate All 13 Grandpa designs Grandpa with a handlebar moustache →