Free Grandpa SVG

Grandpa in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Grandpa in Pacifico, as a solid black shape
Grandpa in Pacifico. The preview is the SVG file itself.

“Grandpa” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 37 mm (3.94 × 1.46 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length643 mm at this size
Narrowest part1.7 mm at this size
Nodes208 curve and line segments

Measured from the file. PNG: 2,000 × 792 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.37 in (25 × 9 mm)0.43 mm163 mm210Too fine for most machines
2 × 0.74 in (51 × 19 mm)0.86 mm327 mm60Fine detail: vinyl and paper only, weed with care
3 × 1.12 in (76 × 28 mm)1.3 mm490 mm27Vinyl, card and thin sheet
4 × 1.49 in (102 × 38 mm)1.7 mm653 mm14Vinyl, card and thin sheet
6 × 2.23 in (152 × 57 mm)2.6 mm980 mm5Vinyl, card and thin sheet
8 × 2.98 in (203 × 76 mm)3.5 mm1,307 mm3Any material, including 3 mm wood and acrylic
12 × 4.46 in (305 × 113 mm)5.2 mm1,960 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Grandpa SVG files

← Grandpa with a handlebar moustache All 13 Grandpa designs Grandpa in Lobster →