Free Grandpa SVG

Grandpa with a handlebar moustache SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Grandpa with a handlebar moustache, as a solid black shape — Grandpa with a handlebar moustache. The preview is the SVG file itself.

“Grandpa” with a handlebar moustache above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 50 mm (3.94 × 1.97 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	9: 5 outer edges and 4 cut-outs
Cut length	804 mm at this size
Narrowest part	1.2 mm at this size
Nodes	203 curve and line segments

Measured from the file. PNG: 2,000 × 1,040 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.5 in (25 × 13 mm)	0.3 mm	204 mm	170	Too fine for most machines
2 × 1 in (51 × 25 mm)	0.61 mm	408 mm	50	Fine detail: vinyl and paper only, weed with care
3 × 1.5 in (76 × 38 mm)	0.91 mm	613 mm	21	Fine detail: vinyl and paper only, weed with care
4 × 2 in (102 × 51 mm)	1.2 mm	817 mm	10	Vinyl, card and thin sheet
6 × 3.01 in (152 × 76 mm)	1.8 mm	1,225 mm	3	Vinyl, card and thin sheet
8 × 4.01 in (203 × 102 mm)	2.4 mm	1,634 mm	2	Vinyl, card and thin sheet
12 × 6.01 in (305 × 153 mm)	3.7 mm	2,451 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Grandpa SVG files

← Grandpa with a drop shadow All 13 Grandpa designs Grandpa in Pacifico →