Grandpa in Amatic SC SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Grandpa” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.
What is in the file
| Size | 100 × 35 mm (3.94 × 1.39 in), scales to any size |
|---|---|
| Pieces | 7 separate pieces |
| Outlines to cut | 12: 7 outer edges and 5 cut-outs |
| Cut length | 928 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 264 curve and line segments |
Measured from the file. PNG: 2,000 × 754 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.35 in (25 × 9 mm) | 0.51 mm | 236 mm | 220 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.7 in (51 × 18 mm) | 1 mm | 471 mm | 65 | Vinyl, card and thin sheet |
| 3 × 1.06 in (76 × 27 mm) | 1.5 mm | 707 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.41 in (102 × 36 mm) | 2 mm | 943 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.11 in (152 × 54 mm) | 3 mm | 1,414 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.82 in (203 × 72 mm) | 4.1 mm | 1,886 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 4.22 in (305 × 107 mm) | 6.1 mm | 2,829 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Grandpa SVG files
-
Grandpa in block capitals Solid · 7 pieces
-
Grandpa with a swash underline Solid · 2 pieces
-
Grandpa with stars Solid · 10 pieces
-
Grandpa outline lettering Outline · 9 pieces
-
Grandpa stencil plate Solid · one piece
-
Grandpa with a drop shadow Layered · 2 pieces
-
Grandpa with a handlebar moustache Solid · 5 pieces
-
Grandpa in Pacifico Solid · one piece
← Grandpa in Alfa Slab One All 13 Grandpa designs Grandpa in block capitals →