Free Grandpa SVG

Grandpa with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Grandpa with stars, as a solid black shape
Grandpa with stars. The preview is the SVG file itself.

“Grandpa” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 61 mm (3.94 × 2.39 in), scales to any size
Pieces10 separate pieces
Outlines to cut14: 10 outer edges and 4 cut-outs
Cut length846 mm at this size
Narrowest part1.2 mm at this size
Nodes228 curve and line segments

Measured from the file. PNG: 2,000 × 1,246 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.61 in (25 × 15 mm)0.3 mm215 mm150Too fine for most machines
2 × 1.22 in (51 × 31 mm)0.61 mm430 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.82 in (76 × 46 mm)0.91 mm645 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.43 in (102 × 62 mm)1.2 mm860 mm8Vinyl, card and thin sheet
6 × 3.65 in (152 × 93 mm)1.8 mm1,289 mm3Vinyl, card and thin sheet
8 × 4.86 in (203 × 124 mm)2.4 mm1,719 mm2Vinyl, card and thin sheet
12 × 7.3 in (305 × 185 mm)3.7 mm2,579 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Grandpa SVG files

← Grandpa with a swash underline All 13 Grandpa designs Grandpa outline lettering →