Grandpa in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Grandpa” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 24 mm (3.94 × 0.96 in), scales to any size |
|---|---|
| Pieces | 7 separate pieces |
| Outlines to cut | 11: 7 outer edges and 4 cut-outs |
| Cut length | 477 mm at this size |
| Narrowest part | 2.8 mm at this size |
| Nodes | 149 curve and line segments |
Measured from the file. PNG: 2,000 × 546 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.24 in (25 × 6 mm) | 0.71 mm | 121 mm | 270 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.49 in (51 × 12 mm) | 1.4 mm | 242 mm | 85 | Vinyl, card and thin sheet |
| 3 × 0.73 in (76 × 19 mm) | 2.1 mm | 363 mm | 39 | Vinyl, card and thin sheet |
| 4 × 0.98 in (102 × 25 mm) | 2.8 mm | 485 mm | 20 | Vinyl, card and thin sheet |
| 6 × 1.46 in (152 × 37 mm) | 4.3 mm | 727 mm | 7 | Any material, including 3 mm wood and acrylic |
| 8 × 1.95 in (203 × 50 mm) | 5.7 mm | 969 mm | 5 | Any material, including 3 mm wood and acrylic |
| 12 × 2.93 in (305 × 74 mm) | 8.5 mm | 1,454 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Grandpa SVG files
-
Grandpa in Alfa Slab One Solid · 7 pieces
-
Grandpa in Amatic SC Solid · 7 pieces
-
Grandpa in block capitals Solid · 7 pieces
-
Grandpa with a swash underline Solid · 2 pieces
-
Grandpa with stars Solid · 10 pieces
-
Grandpa outline lettering Outline · 9 pieces
-
Grandpa stencil plate Solid · one piece
-
Grandpa with a drop shadow Layered · 2 pieces
← Grandpa in Kaushan Script All 13 Grandpa designs Grandpa in Alfa Slab One →