Free Grandpa SVG

Grandpa stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Grandpa stencil plate, as a solid black shape
Grandpa stencil plate. The preview is the SVG file itself.

A rounded plate with “GRANDPA” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 35 mm (3.94 × 1.36 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length815 mm at this size
Narrowest part1.1 mm at this size
Nodes194 curve and line segments

Measured from the file. PNG: 2,000 × 740 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.35 in (25 × 9 mm)0.28 mm207 mm220Too fine for most machines
2 × 0.69 in (51 × 18 mm)0.56 mm414 mm65Fine detail: vinyl and paper only, weed with care
3 × 1.03 in (76 × 26 mm)0.84 mm621 mm27Fine detail: vinyl and paper only, weed with care
4 × 1.38 in (102 × 35 mm)1.1 mm828 mm14Vinyl, card and thin sheet
6 × 2.07 in (152 × 53 mm)1.7 mm1,242 mm5Vinyl, card and thin sheet
8 × 2.76 in (203 × 70 mm)2.2 mm1,656 mm4Vinyl, card and thin sheet
12 × 4.14 in (305 × 105 mm)3.4 mm2,484 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Grandpa SVG files

← Grandpa outline lettering All 13 Grandpa designs Grandpa with a drop shadow →