Free Give Thanks SVG

Give Thanks stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Give Thanks stencil plate, as a solid black shape
Give Thanks stencil plate. The preview is the SVG file itself.

A rounded plate with “GIVE THANKS” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 84 mm (3.94 × 3.3 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length1,441 mm at this size
Narrowest part1.3 mm at this size
Nodes246 curve and line segments

Measured from the file. PNG: 2,000 × 1,687 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.84 in (25 × 21 mm)0.33 mm366 mm110Too fine for most machines
2 × 1.67 in (51 × 43 mm)0.66 mm732 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.51 in (76 × 64 mm)0.99 mm1,098 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.35 in (102 × 85 mm)1.3 mm1,464 mm6Vinyl, card and thin sheet
6 × 5.02 in (152 × 128 mm)2 mm2,196 mm2Vinyl, card and thin sheet
8 × 6.7 in (203 × 170 mm)2.6 mm2,928 mm1Vinyl, card and thin sheet
12 × 10.04 in (305 × 255 mm)4 mm4,392 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Give Thanks SVG files

← Give Thanks outline lettering All 13 Give Thanks designs Give Thanks with a drop shadow →