Give Thanks in Amatic SC SVG
“Give Thanks” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 99 × 100 mm (3.91 × 3.94 in), scales to any size |
|---|---|
| Pieces | 10 separate pieces |
| Outlines to cut | 11: 10 outer edges and 1 cut-out |
| Cut length | 1,374 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 426 curve and line segments |
Measured from the file. PNG: 1,988 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.99 × 1 in (25 × 25 mm) | 0.38 mm | 349 mm | 100 | Too fine for most machines |
| 1.99 × 2 in (50 × 51 mm) | 0.76 mm | 698 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 2.98 × 3 in (76 × 76 mm) | 1.1 mm | 1,047 mm | 9 | Vinyl, card and thin sheet |
| 3.98 × 4 in (101 × 102 mm) | 1.5 mm | 1,396 mm | 4 | Vinyl, card and thin sheet |
| 5.96 × 6 in (151 × 152 mm) | 2.3 mm | 2,094 mm | 1 | Vinyl, card and thin sheet |
| 7.95 × 8 in (202 × 203 mm) | 3 mm | 2,792 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.93 × 12 in (303 × 305 mm) | 4.6 mm | 4,188 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Give Thanks SVG files
-
Give Thanks in block capitals Solid · 10 pieces -
Give Thanks in script and capitals Solid · 8 pieces -
Give Thanks with hearts Solid · 11 pieces -
Give Thanks outline lettering Outline · 12 pieces -
Give Thanks stencil plate Solid · one piece -
Give Thanks with a drop shadow Layered · 5 pieces -
Give Thanks in Pacifico Solid · 3 pieces -
Give Thanks in Lobster Solid · 5 pieces
← Give Thanks in Alfa Slab One All 12 Give Thanks designs Give Thanks in block capitals →