Free Give Thanks SVG

Give Thanks outline lettering SVG

Give Thanks outline lettering, drawn as a line — Give Thanks outline lettering. The preview is the SVG file itself.

“Give Thanks” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 58 mm (3.94 × 2.26 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	26: 12 outer edges and 14 cut-outs
Cut length	1,425 mm at this size
Narrowest part	1.4 mm at this size
Nodes	366 curve and line segments

Measured from the file. PNG: 2,000 × 1,183 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.58 in (25 × 15 mm)	0.36 mm	362 mm	150	Too fine for most machines
2 × 1.15 in (51 × 29 mm)	0.71 mm	724 mm	45	Fine detail: vinyl and paper only, weed with care
3 × 1.73 in (76 × 44 mm)	1.1 mm	1,086 mm	18	Vinyl, card and thin sheet
4 × 2.3 in (102 × 58 mm)	1.4 mm	1,448 mm	8	Vinyl, card and thin sheet
6 × 3.45 in (152 × 88 mm)	2.1 mm	2,172 mm	3	Vinyl, card and thin sheet
8 × 4.6 in (203 × 117 mm)	2.8 mm	2,896 mm	2	Vinyl, card and thin sheet
12 × 6.9 in (305 × 175 mm)	4.3 mm	4,343 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Give Thanks SVG files

← Give Thanks with hearts All 12 Give Thanks designs Give Thanks stencil plate →