Give Thanks in Pacifico SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Give Thanks” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.
What is in the file
| Size | 100 × 79 mm (3.94 × 3.11 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 8: 3 outer edges and 5 cut-outs |
| Cut length | 999 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 288 curve and line segments |
Measured from the file. PNG: 2,000 × 1,598 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.79 in (25 × 20 mm) | 0.51 mm | 254 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.58 in (51 × 40 mm) | 1 mm | 507 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.37 in (76 × 60 mm) | 1.5 mm | 761 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.16 in (102 × 80 mm) | 2 mm | 1,015 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.75 in (152 × 121 mm) | 3 mm | 1,522 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.33 in (203 × 161 mm) | 4.1 mm | 2,030 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.49 in (305 × 241 mm) | 6.1 mm | 3,045 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Give Thanks SVG files
-
Give Thanks in Lobster Solid · 5 pieces
-
Give Thanks in Kaushan Script Solid · 10 pieces
-
Give Thanks in Lilita One Solid · 11 pieces
-
Give Thanks in Alfa Slab One Solid · 11 pieces
-
Give Thanks in Amatic SC Solid · 10 pieces
-
Give Thanks in block capitals Solid · 10 pieces
-
Give Thanks in script and capitals Solid · 8 pieces
-
Give Thanks with hearts Solid · 11 pieces
← Give Thanks with three ears of wheat All 13 Give Thanks designs Give Thanks in Lobster →