Give Thanks in script and capitals SVG
“Give” in Pacifico script over “THANKS” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 96 × 100 mm (3.79 × 3.94 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 11: 8 outer edges and 3 cut-outs |
| Cut length | 1,351 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 196 curve and line segments |
Measured from the file. PNG: 1,927 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.96 × 1 in (24 × 25 mm) | 0.86 mm | 343 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.92 × 2 in (49 × 51 mm) | 1.7 mm | 686 mm | 25 | Vinyl, card and thin sheet |
| 2.89 × 3 in (73 × 76 mm) | 2.6 mm | 1,029 mm | 9 | Vinyl, card and thin sheet |
| 3.85 × 4 in (98 × 102 mm) | 3.5 mm | 1,373 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.77 × 6 in (147 × 152 mm) | 5.2 mm | 2,059 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.7 × 8 in (195 × 203 mm) | 6.9 mm | 2,745 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.54 × 12 in (293 × 305 mm) | 10 mm | 4,118 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Give Thanks SVG files
-
Give Thanks with hearts Solid · 11 pieces -
Give Thanks outline lettering Outline · 12 pieces -
Give Thanks stencil plate Solid · one piece -
Give Thanks with a drop shadow Layered · 5 pieces -
Give Thanks in Pacifico Solid · 3 pieces -
Give Thanks in Lobster Solid · 5 pieces -
Give Thanks in Kaushan Script Solid · 10 pieces -
Give Thanks in Lilita One Solid · 11 pieces
← Give Thanks in block capitals All 12 Give Thanks designs Give Thanks with hearts →