Give Thanks with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Give Thanks” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 80 mm (3.94 × 3.14 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 14: 5 outer edges and 9 cut-outs |
| Cut length | 1,644 mm at this size |
| Narrowest part | 4.4 mm at this size |
| Nodes | 442 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,612 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.8 in (25 × 20 mm) | 1.1 mm | 418 mm | 120 | Vinyl, card and thin sheet |
| 2 × 1.6 in (51 × 41 mm) | 2.2 mm | 835 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.39 in (76 × 61 mm) | 3.4 mm | 1,253 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.19 in (102 × 81 mm) | 4.5 mm | 1,670 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.79 in (152 × 122 mm) | 6.7 mm | 2,505 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.38 in (203 × 162 mm) | 8.9 mm | 3,341 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.58 in (305 × 243 mm) | 13 mm | 5,011 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Give Thanks SVG files
-
Give Thanks with three ears of wheat Solid · 9 pieces
-
Give Thanks in Pacifico Solid · 3 pieces
-
Give Thanks in Lobster Solid · 5 pieces
-
Give Thanks in Kaushan Script Solid · 10 pieces
-
Give Thanks in Lilita One Solid · 11 pieces
-
Give Thanks in Alfa Slab One Solid · 11 pieces
-
Give Thanks in Amatic SC Solid · 10 pieces
-
Give Thanks in block capitals Solid · 10 pieces
← Give Thanks stencil plate All 13 Give Thanks designs Give Thanks with three ears of wheat →