Give Thanks in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Give Thanks” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 60 mm (3.94 × 2.37 in), scales to any size |
|---|---|
| Pieces | 11 separate pieces |
| Outlines to cut | 13: 11 outer edges and 2 cut-outs |
| Cut length | 826 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 207 curve and line segments |
Measured from the file. PNG: 2,000 × 1,235 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.6 in (25 × 15 mm) | 0.86 mm | 210 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.2 in (51 × 31 mm) | 1.7 mm | 420 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.81 in (76 × 46 mm) | 2.6 mm | 629 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.41 in (102 × 61 mm) | 3.5 mm | 839 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.61 in (152 × 92 mm) | 5.2 mm | 1,259 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.82 in (203 × 122 mm) | 6.9 mm | 1,678 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.22 in (305 × 183 mm) | 10 mm | 2,518 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Give Thanks SVG files
-
Give Thanks in Alfa Slab One Solid · 11 pieces
-
Give Thanks in Amatic SC Solid · 10 pieces
-
Give Thanks in block capitals Solid · 10 pieces
-
Give Thanks in script and capitals Solid · 8 pieces
-
Give Thanks with hearts Solid · 11 pieces
-
Give Thanks outline lettering Outline · 12 pieces
-
Give Thanks stencil plate Solid · one piece
-
Give Thanks with a drop shadow Layered · 5 pieces
← Give Thanks in Kaushan Script All 13 Give Thanks designs Give Thanks in Alfa Slab One →