Free Give Thanks SVG

Give Thanks in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Give Thanks in Alfa Slab One, as a solid black shape
Give Thanks in Alfa Slab One. The preview is the SVG file itself.

“Give Thanks” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 51 mm (3.94 × 2 in), scales to any size
Pieces11 separate pieces
Outlines to cut13: 11 outer edges and 2 cut-outs
Cut length841 mm at this size
Narrowest part2.5 mm at this size
Nodes200 curve and line segments

Measured from the file. PNG: 2,000 × 1,056 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.51 in (25 × 13 mm)0.64 mm214 mm170Fine detail: vinyl and paper only, weed with care
2 × 1.02 in (51 × 26 mm)1.3 mm427 mm50Vinyl, card and thin sheet
3 × 1.53 in (76 × 39 mm)1.9 mm641 mm21Vinyl, card and thin sheet
4 × 2.04 in (102 × 52 mm)2.5 mm854 mm10Vinyl, card and thin sheet
6 × 3.05 in (152 × 78 mm)3.8 mm1,282 mm3Any material, including 3 mm wood and acrylic
8 × 4.07 in (203 × 103 mm)5.1 mm1,709 mm2Any material, including 3 mm wood and acrylic
12 × 6.11 in (305 × 155 mm)7.6 mm2,563 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Give Thanks SVG files

← Give Thanks in Lilita One All 13 Give Thanks designs Give Thanks in Amatic SC →