Free Give Thanks SVG

Give Thanks in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Give Thanks in Kaushan Script, as a solid black shape
Give Thanks in Kaushan Script. The preview is the SVG file itself.

“Give Thanks” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 71 mm (3.94 × 2.79 in), scales to any size
Pieces10 separate pieces
Outlines to cut12: 10 outer edges and 2 cut-outs
Cut length1,022 mm at this size
Narrowest part1 mm at this size
Nodes358 curve and line segments

Measured from the file. PNG: 2,000 × 1,438 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.71 in (25 × 18 mm)0.25 mm260 mm130Too fine for most machines
2 × 1.42 in (51 × 36 mm)0.51 mm519 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.12 in (76 × 54 mm)0.76 mm779 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.83 in (102 × 72 mm)1 mm1,038 mm8Vinyl, card and thin sheet
6 × 4.25 in (152 × 108 mm)1.5 mm1,558 mm2Vinyl, card and thin sheet
8 × 5.66 in (203 × 144 mm)2 mm2,077 mm2Vinyl, card and thin sheet
12 × 8.5 in (305 × 216 mm)3 mm3,115 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Give Thanks SVG files

← Give Thanks in Lobster All 13 Give Thanks designs Give Thanks in Lilita One →