Give Thanks in Lobster SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Give Thanks” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.
What is in the file
| Size | 100 × 74 mm (3.94 × 2.92 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 8: 5 outer edges and 3 cut-outs |
| Cut length | 974 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 238 curve and line segments |
Measured from the file. PNG: 2,000 × 1,502 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.74 in (25 × 19 mm) | 0.38 mm | 247 mm | 120 | Too fine for most machines |
| 2 × 1.48 in (51 × 38 mm) | 0.76 mm | 495 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.22 in (76 × 56 mm) | 1.1 mm | 742 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.96 in (102 × 75 mm) | 1.5 mm | 990 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.45 in (152 × 113 mm) | 2.3 mm | 1,484 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.93 in (203 × 151 mm) | 3 mm | 1,979 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 8.89 in (305 × 226 mm) | 4.6 mm | 2,969 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Give Thanks SVG files
-
Give Thanks in Kaushan Script Solid · 10 pieces
-
Give Thanks in Lilita One Solid · 11 pieces
-
Give Thanks in Alfa Slab One Solid · 11 pieces
-
Give Thanks in Amatic SC Solid · 10 pieces
-
Give Thanks in block capitals Solid · 10 pieces
-
Give Thanks in script and capitals Solid · 8 pieces
-
Give Thanks with hearts Solid · 11 pieces
-
Give Thanks outline lettering Outline · 12 pieces
← Give Thanks in Pacifico All 13 Give Thanks designs Give Thanks in Kaushan Script →