Free frog SVG

Frog on a lily pad SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Frog on a lily pad, as a solid black shape
Frog on a lily pad. The preview is the SVG file itself.

A frog sitting in profile on a floating lily pad with a water lily opening behind it. The frog, the pad and the flower are welded into one piece.

What is in the file

Size100 × 65 mm (3.94 × 2.57 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length507 mm at this size
Narrowest part1.7 mm at this size
Nodes171 curve and line segments

Measured from the file. PNG: 2,000 × 1,333 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 17 mm)0.43 mm129 mm140Too fine for most machines
2 × 1.31 in (51 × 33 mm)0.86 mm258 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.96 in (76 × 50 mm)1.3 mm386 mm15Vinyl, card and thin sheet
4 × 2.61 in (102 × 66 mm)1.7 mm515 mm8Vinyl, card and thin sheet
6 × 3.92 in (152 × 100 mm)2.6 mm773 mm2Vinyl, card and thin sheet
8 × 5.22 in (203 × 133 mm)3.5 mm1,030 mm2Any material, including 3 mm wood and acrylic
12 × 7.84 in (305 × 199 mm)5.2 mm1,545 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More frog SVG files

← Bullfrog with a puffed throat All 15 frogs Frog prince with a crown →