Bullfrog with a puffed throat SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A heavy bullfrog sitting in profile and calling, its throat blown up like a ball, with the round eardrum behind its eye cut in.
What is in the file
| Size | 100 × 70 mm (3.94 × 2.76 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 634 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 187 curve and line segments |
Measured from the file. PNG: 2,000 × 1,423 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.7 in (25 × 18 mm) | 0.61 mm | 161 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.4 in (51 × 36 mm) | 1.2 mm | 322 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.1 in (76 × 53 mm) | 1.8 mm | 483 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.8 in (102 × 71 mm) | 2.4 mm | 644 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.2 in (152 × 107 mm) | 3.7 mm | 966 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.6 in (203 × 142 mm) | 4.9 mm | 1,288 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.4 in (305 × 213 mm) | 7.3 mm | 1,932 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.