Free frog SVG

Mandala frog SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mandala frog, as a solid black shape
Mandala frog. The preview is the SVG file itself.

A frog from above with a flower mandala cut through its back, a petal between its eyes and a teardrop down each thigh. Exactly symmetrical; cut it at full size.

What is in the file

Size100 × 87 mm (3.94 × 3.44 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut27: 1 outer edge and 26 cut-outs
Cut length1,097 mm at this size
Narrowest part1 mm at this size
Nodes418 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,758 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.87 in (25 × 22 mm)0.25 mm279 mm110Too fine for most machines
2 × 1.75 in (51 × 44 mm)0.51 mm557 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.62 in (76 × 67 mm)0.76 mm836 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.5 in (102 × 89 mm)1 mm1,115 mm6Vinyl, card and thin sheet
6 × 5.24 in (152 × 133 mm)1.5 mm1,672 mm2Vinyl, card and thin sheet
8 × 6.99 in (203 × 178 mm)2 mm2,229 mm1Vinyl, card and thin sheet
12 × 10.49 in (305 × 266 mm)3 mm3,344 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More frog SVG files

← Frog prince with a crown All 15 frogs Poison dart frog →