Frog face SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Just the face: a wide head, two round eyes on top, two nostrils, round cheeks and a smile from side to side. Exactly symmetrical, for masks, bibs and party cups.
What is in the file
| Size | 100 × 79 mm (3.94 × 3.11 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 653 mm at this size |
| Narrowest part | 3.1 mm at this size |
| Nodes | 128 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,596 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.79 in (25 × 20 mm) | 0.79 mm | 166 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.58 in (51 × 40 mm) | 1.6 mm | 332 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.37 in (76 × 60 mm) | 2.4 mm | 498 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.16 in (102 × 80 mm) | 3.1 mm | 663 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.74 in (152 × 120 mm) | 4.7 mm | 995 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.32 in (203 × 161 mm) | 6.3 mm | 1,327 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.48 in (305 × 241 mm) | 9.4 mm | 1,990 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.